Bell-gossett P5002169C Series VSCS User Manual download pdf (Page 25)

GUARDS

ANSI/OSHA COUPLING GUARD

REMOVAL/INSTALLATION

WARNING: Extreme Temperature

Hazard

If pump, motor, or piping are operating at

extremely high or low temperatures, guarding or

insulation is required.

Failure to follow these instructions could result in

serious personal injury or death, or property

damage.

Removal

(See Figures 19 and 20.)

1. Remove the two capscrews and hardware

that hold the outer guard’s top and bottom

halves together. Remove the top half of

the outer guard.

2. Remove the two capscrews and hardware

that hold the inner guard’s top and bottom

halves together. Remove the top half of

the inner guard.

3. On some units, it may now be required to

remove the coupling to gain access to the

remaining guard hardware.

4. Remove the capscrews and hardware that

fasten the guards to the guard support.

5. On units supplied with spacer couplings, a

second guard support is supplied

underneath the inner guard. If present,

remove the two capscrews and hardware

fastened to the second guard support.

6. Remove the capscrews and hardware that

hold the guard support(s) to the base rail.

Remove the guard support(s) and bottom

guard halves.

Installation

(See Figures 19 and 20.)

1. Place the bottom inner guard into the bottom

outer guard.

2. Hold the lower guards under the coupling and

slide the guard support(s) between the base

and lower guards.

3. Install the guard to the support hardware but do

not tighten. Move the support(s) to the proper

location on the base and install the hardware

for support(s) to the base.

4. Slide the outer guard so it is within .25” from

the motor face.

5. Slide the inner guard so it is within .25” from

the pump bracket face.

6. Tighten the hardware.

Figure 19: Coupling Guard

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Comments to this Manuals

No comments

Bell-gossett P5002169C Series VSCS User Manual Page 25

Comments to this Manuals

Related products and manuals for Pumps Bell-gossett P5002169C Series VSCS