Bell-gossett V57083D Diaphragm Expansion Tanks ASME And Non-Cod User Manual download pdf

DESCRIPTION

Series “PT” and “PTA” expansion tanks are precharged

diaphragm-type vessels. The PTA Series meet the require-

ments of the ASME boiler and pressure vessels code. The

Series “PT” and “PTA” tanks are designed to absorb the force

of expanding water and protect the potable water system

from pressure build up. Refer to table 1 on page 2 for pres-

sure and temperature information.

Series “WTX”, “WT” and “WTA” tanks are precharged

diaphragm-type vessels. The WTA Series meet the require-

ments of the ASME boiler and pressure vessels code. The

Series “WTX”, “WT” and “WTA” tanks help protect the pump

and pressure switches against short cycling in potable well

water systems. The well tank delivers adequate water under

pressure between pump cycles to meet the required demand.

It will provide economical system operation by minimizing

pump starts and saving energy. Refer to table 1 on page 2 for

pressure and temperature information.

The Series “HFT” tank is designed to absorb the expansion

force in heating water and maintain proper pressurization in a

closed hydronic system. The Series “HFT” tank is not for use

in potable water systems. Refer to table 1 on page 2 for pres-

sure and temperature information.

Diaphragm Expansion Tanks

ASME And Non-Code

WARNING: Label Part No. 9015-463

must be installed in this location.

If missing, it must be replaced.

WARNING: Label Part No. 9017-078

must be installed in this location.

If missing, it must be replaced.

SAFETY

INSTRUCTION

This safety alert symbol will be used in this manual to draw

attention to safety related instructions. When used, the safety

alert symbol means ATTENTION! BECOME ALERT! YOUR

SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE IN-

STRUCTIONS MAY RESULT IN A SAFETY HAZARD.

SERIES HFT TANKS ARE

NOT FOR USE IN POTABLE

WATER SYSTEMS

WARNING: Potable or fresh water can cause serious

corrosion in Series HFT tanks. This can result in leakage

and a potential explosion. Do not use HFT tanks for

potable or fresh water applications. Failure to follow this

instruction will result in serious personal injury or death

and property damage.

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.

INSTRUCTION MANUAL

V57083D

1 2 3 4

Summary of Contents

Page 1 - ASME And Non-Code

DESCRIPTIONSeries “PT” and “PTA” expansion tanks are prechargeddiaphragm-type vessels. The PTA Series meet the require-ments of the ASME boiler and pr

Page 2 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSA. Pre-Installation1. Inspect the expansion tank for damage.WARNING: If the expansion tank is damaged, it must be exchanged f

Page 3 - OPERATING INSTRUCTIONS

C. Installation ( “HFT” Series)The series “HFT” may be installed into a tee or any other suit-able tapping on a water heating system, preferably on th

Page 4 - SERVICE INSTRUCTIONS

SERVICE INSTRUCTIONS1. Check the expansion tank periodically for signs of externalleakage or corrosion. If found, the tank must be replaced.WARNING: S

Comments to this Manuals

No comments

Bell-gossett V57083D Diaphragm Expansion Tanks ASME And Non-Cod User Manual

Browse online or download User Manual for Air equipment Bell-gossett V57083D Diaphragm Expansion Tanks ASME And Non-Cod. Bell & Gossett V57083D Diaphragm Expansion Tanks ASME And Non-Code User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Bell-gossett V57083D Diaphragm Expansion Tanks ASME And Non-Cod